Flight Controller F722-HD | Mateksys | Hàng nhập khẩu

FC Specifications

• MCU: 216MHz STM32F722RET6

• IMU: MPU6000 (SPI)

• Baro: BMP280 (I2C)

• Blackbox: 32M-byte Flash memory (SPI)

• OSD: Support external DJI OSD/FrskyOSD,  No Analog MAX7456 OSD built-in

• 6x Uarts with built-in inversion

• 1x Softserial_Tx option

• 10x Dshot/PWM outputs

• 1x I2C

• 4x ADC (VBAT, Current, RSSI, AirSpeed)

• 2x SH1.0_8pin connector (Vbat/G/Curr/Rx3/S1~S10)

• 1x SH1.0_6pin connector for DJI FPV Air Unit

• 3x LEDs for FC STATUS (Blue, Red) and 3.3V indicator(Red)

• Switchable 8V output

• PWM camera control: Yes

• TR/SA VTX control: Yes

• WS2812 Led Strip : Yes

• Beeper : Yes

• RSSI: Yes

• Analog Airspeed sensor: Yes

• Digital Airspeed sensor: Yes

Power

• Input: 9~36V (3~8S LiPo)

• BEC: 5V 2A cont. (Max.3A)

• BEC: 8V 2A cont. (Max.3A)

• LDO 3.3V: Max.200mA

• Battery Voltage Sensor: 1:10 (Scale 110)

• No Current Sensor built-in

FC Firmware

• BetaFlight unified target: MATEKF722HD(MTKS)

• INAV target: MATEKF722PX

Physical

• Mounting: 30.5 x 30.5mm, Φ4mm with Grommets Φ3mm

• Dimensions: 36 x 36 x 5 mm

• Weight: 6.5g

Including

• 1x FC F722-HD

• 6x Silicon grommets M4 to M3

• 1x SH1.0_8pin cable 5cm

• 2x SH1.0_8pin connectors

• 1x SH1.0_6pin to GH1.25_8pin cable 8cm