Flight Controller F722-mini SE | Mateksys | Hàng nhập khẩu

FC SPECIFICATIONS

• MCU: 216MHz STM32F722RET6

• IMU: MPU6000 (SPI)

• OSD: AT7456E (SPI)

• Baro: Infineon DPS310 (I2C)

• Blackbox: 32M-byte Flash memory (SPI)

• 5x Uarts (1,2,3,4,6) with build-in inversion

• 1x Softserial supported

• 8x Dshot/Proshot/oneshot outputs

• 1x I2C

• 1x SH1.0_8pin connector (Vbat/G/Curr/R6/S1/S2/S3/S4)

• 3x LEDs for FC STATUS (Blue, Green) and 3.3V indicator(Red)

• Vbat filtered output power for VTX,  Switchable via AUX (modes tab-user1)

• Dual Camera image switchable via AUX (modes tab-user2)

• Convertible 20mm to 30.5mm mounting

• Camera control: Yes

• Smartaudio & Tramp VTX protocol: Yes

• DJI OSD: Yes (any spare Uart Tx & Rx)

• WS2812 Led Strip : Yes

• Beeper : Yes

• RSSI: Yes

• Additional ADC for INAV analog airspeed

POWER

• Input: 6~36V (2~8S LiPo)

• BEC: 5V 2A

• LDO 3.3V: Max.200mA

• Battery Voltage Sensor: 1:10 (Scale 110)

• No Current Sensor built-in, supports external current sensor of PDB/4in1

FIRMWARE

• INAV target: MATEKF722mini

• BetaFlight unified target: MATEKF722mini(MTKS)

• BetaFlight legacy target: MATEKF722SE

PHYSICAL

• Mounting

•      20 x 20mm/Φ3mm with Silicon Grommets

•      20 x 20mm/Φ2mm with Silicon & Brass Grommets

• 30.5 x 30.5mm/Φ3mm with Conversion Plate and Silicon Grommets

• Dimensions:  28 x 28 mm

• Weight: 5g

INCLUDING

• 1x FC F722-miniSE

• 1x 20mm to 30.5mm conversion plate

• 6x Silicon grommets M4 to M3

• 6x Brass grommets M3 to M2

• 1x SH1.0_8pin cable 5cm

• 2x SH1.0_8pin connectors