FLYDUINO KISS 32A 32Bit ESC

The KISS ESC32A powered by a M4 MCU is the new member in the KISS family, developed for race copters with power hungry motor/prop combinations. 

Actively limited to 45A for longevity, it comes with all the features of its little brother, the ESC24A re. With a capacitor it can be driven by up to 6s lipos.

SPECIFICATIONS

• 32-Bit-ARM Cortex M4 MCU @ 80 MHz

• Telemetry capability (voltage, current, temperature, rpm)

• Over current protection (measures the current and reduces it to max 45A)

• Over temperature protection (reduces the max power if hotter then 100°C)

• sinHybrid :: Sinwave/BackEMF Hybrid Commutation for smoother running.)

• Dshot 2400 (Full resolution of 2000 steps takes only 6.5μs).

• Supports all common Dshot commands like turtle mode, 3D mode and rotation direction change.

• Expanded adaptive auto timing (3,25-30° advance on each commutation),

• For Race Multicopters (32A continuous also with weak cooling),High max. RPM (500.000ERpm, 71.400Rpm with a 14Pole Motor) 

• Small size (19 x 27 mm)

• Accurate RPM control (2000 steps using Dshot)

• No additional capacitor needed for 3-5S. Add a min. 220μF min. 50V Cap for 6S usage!

• Very fast throttle response, Linear throttle response, Active freewheeling (low diode losses)

• Regenerative braking 3-6S LiPo Dshot 100-2400, Oneshot42, Oneshot125 and normal (25 – 500Hz) PWM auto detected.

• Supports FrSky Sbus, Graupner SumD, TBS CROSSFIRE and Multiplex SRXL, S-Port, Graupner HOTT, TBS CROSSFIRE and Sensorbus

• Operating voltage 9 - 30V (3-6s)

• Maximum continuous current 32A, instantaneous maximum current 45A, actively limited

• 600000 ERPM maximum rotation field speed (useage up to 500000 recommended)

​​